Meade-instruments TE923W-M Manuel d'utilisateur

1TE923W-MPROFESSIONAL WEATHER STATIONWITH REMOTE CONTROLUSER MANUALMP12:5,80/11/4dmp.RLLEWYENOH)GNE(1MIW329ET 1

10Rain Gauge TS906-MFEATURES• Precipitation measurement• Remote rainfall data transmission to the main unit via 433 MHz signal• 100 feet (30 meters) t

11Battery installation• Unlock the funnel-shaped top on the rain gauge by turning both knobs on the sides in an anti-clockwise direction.• Remove the

12BACDGFHEAnemometer (wind sensor) TS906FEATURES• Wind speed and wind direction measurement• Remote wind speed and wind direction data transmission to

13Assembly• Slide the wind cups on to the anemometer rotating shaft. Do not use force.• Insert the Allen Wrench (provided) into the wind cup set screw

14Main UnitThe main unit measures pressure, indoor temperature, humidity, and receives atomic time datafrom the US Atomic Clock and all remote weather

15Battery installation• Open the battery compartment door on the back of the main unit.• Insert four (4) AA size batteries according to the polarities

16To set the pressure & altitude units and program your altitude, use the handheld remote control ormain unit control panel:Buttons and ControlsMo

17 I. OPEN J. LIGHT SENSOR– AUTO,ON, OFF K. SENSITIVITY– HIGH/LOW- Opens the control buttons panel on main unit- Toggles the light sensor to a

18Operating mode descriptionsThe main unit has seven (7) different modes (windows) each displaying the separate datacategory. When a specific mode is

19Indoor Temp.Channel Temp.Dew-point TempatureTempature and HumidityMode IconMin-Max DisplayTemp. AlertChannel andReception statusSensor Battery Statu

2Table of ContentsIntroduction ...3Standard Package Content

20 Rain WindowDisplays:• Precipitation amount for the last hour, day, yesterday, last week and last month• Rainfall alert•

21Customizing your Weather StationIt is required to program:• The pressure parameters during Initial Setup (See Pressure and Weather Forecast Mode P.2

22Using Different Weather ModesPressure and Weather Forecast ModeIt indicates the current barometric pressure, the sea level pressure, the weather for

232. Changing Pressure and AltitudeSelect the Pressure and Weather Forecast window. From the main unit: Press UP or DOWN untilthe pressure and weather

24Weather Forecast DisplaysSunnyPartly CloudyCloudyLight Rain Display Weat

25FULLLASTNEWFIRSTUnderstanding the Moon Phase DiagramUV ModeThe current UV intensity is indicated by the numerical value and more intuitive display,

26Accessing Clock and Alarm ModePress main unit UP or DOWN until the clock icon next to the time/date display continuesto flash.From the handheld r

27Enabling or Disabling the Time Alarms• Press the ALARM/CHART to display the Weekday Alarm or Ice Warning Alarm (Pre-Alarm)time. If these alarms are

28Atomic Time ReceptionThe radio controlled clock will automatically search for, and synchronize to, the NIST (NationalInstitute of Standards and Tech

29Sunrise/Sunset ModeThe main unit is able to calculate the sunrise and sunset times depending on the user definedlocation. The location data contains

3IntroductionMP12:5,80/11/4dmp.RLLEWYENOH)GNE(1MIW329ET 3Thank you for selecting the Meade Instruments TE923WD-M Professional Weather Station with rem

30Understanding of the Sunrise/Sunset DisplayThe sunrise time displayed in the morning will be different from the one displayed in theafternoon/night:

31Accessing Temperature and Humidity ModePress main unit UP or DOWN until the IN icon on the upper right will flash.From the remote control: Press

32Remote Sensor StatusThe wave icon above the current channel display shows the connection status of the correspondingremote sensor:Searching for the

33Setting up the Daily Rainfall Alert• In the Rain Mode, press ALARM/CHART to display the rainfall alert.• Press and hold ALARM/CHART until the rainfa

34Enabling or Disabling the Wind AlertsIn the Wind Mode, press the ALARM/CHART button to recall a current wind speed, a wind speed alert with the “AL

35TroubleshootingQ: “The display shows dashes “—-” for weather parameter(s)”A: The display will show “- - -” when the wireless connection with the rem

36Las Vegas, Nev. -8 LAS SU 36 10 N 115 12 WLos Angeles, Calif. -8 LAX SU 34 3 N 118 15 WPortland, Ore. -8 PDX SU 45 31 N 122 41 WSan Diego, Calif. -8

37Indianapolis, Ind. -5 IND NO 39 46 N 86 10 WJacksonville, Fla. -5 JAX SU 30 22 N 81 40 WMiami, Fla. -5 MIA SU 25 46 N 80 12 WNew York, N.Y. -5 NYC S

38Hamburg, Germany 1 HAM SE 53 33 N 10 2 EHelsinki, Finland2 HEL SE 60 10 N 25 0 EHong Kong, China8 HKG NO 22 20 N 114 11 EIrkutsk, Russia8 IKT SK 52

39Definitions of time zones using daylight savings time (DST)NO = NO DST = Places that do not observe DSTON = Adds 1 hour to the local standard timeSU

4Standard Package Contents Picture ComponentsMain Unit

40SpecificationsRadio Frequency: 433 MHzRF Reception range: 100-328 feet (30 -100 m)Barometric PressureMeasuring Range: 14.75 inHg to 32.44 inHg (500

41Wind SpeedRange: 0 to 199.9mph (199.9 Km/h, 173.7 Knots, 89.3 m/s)Resolution: 0.1mph (0.16 Km/h)Accuracy: (2mph + 5%)Starting Threshold: 3mph (4.8 K

42FCC STATEMENTThis device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause

43MP82:5,80/11/4dmp.RLLEWYENOH)GNE(1MIW329ET 43STANDARD WARRANTY INFORMATIONThis product is warranted by Meade Instruments Corp. (MIC) to be free of d

MP 82:5 ,80/11/4dmp.R LLEWYENOH )GNE(1MI W329ET 44Meade Instruements Corp.27 HubbleIrvine, CA 92618© 2011 Meade Instruments Corp. All Rights Reserved

5Required for installation (not included)- Phillips screwdriver- Mounting pole for anemometer (optional)- Small paper clip for resetInstallationThe Pr

6Before you begin• We recommend using alkaline batteries for the remote weather sensors and the main unitwhen temperatures are above 32°F (0°C). We re

7ECBDAFGUltraviolet (UV) Sensor TS704-MFEATURES• Ultraviolet light levels measurement• Remote UV levels data transmission to the main unit via 433MHz

8Assembly• Snap the U-shaped sensor holder onto the UV sensor unit side grooves• Insert the round end of the U-shaped holder into one of the mounting

9A. LED INDICATOR• Flashes once when the remote sensor transmits a reading to the main unit.• Flashes twice when battery power is low.B. BATTERY COMPA